| box type Dehumidifing dryer Details description |
 |
| product name：box type Dehumidifing dryer |
| release time:2020-09-14 |
| Numbering:plastic resin dryer-001 |
| Brand:wto-btb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:wto-btb |
| patent:wto-btb |
| Producing country: |
| simple description:Box type plastic resin dryer,box type Dehumidifing dryer |
| Product alias:Box type plastic resin dryer,box type Dehumidifing dryer |
|
| box type Dehumidifing dryer Product introduction |
|
box type Dehumidifing dryer parameter
Box type plastic resin dryer
technical parameter：
| Industry standard model |
Technical parameters Model specifications |
Dry weight per time (kg) |
Equipped with motor power(kw) |
Electric heating power(kw) |
Steam consumption
(kg/h) |
Cooling area
2
(m ) |
Air volume
3
(m /h) |
Temperature difference
(℃) |
With baking tray |
Dimensions
(LxWxH)mm |
Equipped with dryer
(station) |
| RXH-14-B |
CT-I |
120 |
1.1 |
15kw |
20 |
20 |
1400 |
±2 |
48 |
2360×1200×2375 |
2 |
| RXH-27-B |
CT-II |
240 |
1.1 |
30kw |
40 |
40 |
5200 |
±2 |
96 |
2360×2200×2370 |
4 |
| RXH-41-B |
CT-III |
360 |
2.2 |
45kw |
60 |
80 |
9800 |
±2 |
144 |
3300×2200×2560 |
6 |
| RXH-54-B |
CT-IV |
480 |
2.2 |
60kw |
80 |
100 |
9800 |
±2 |
192 |
4250×2200×2560 |
8 |
| RXH-7-C |
CT-C-IA |
60 |
0.45 |
9kw |
10 |
10 |
3450 |
±2 |
24 |
1400×1200×2000 |
1 |
| RXH-14-C |
CT-C-I |
120 |
0.45 |
15kw |
18 |
20 |
3450 |
±2 |
48 |
2300×1200×2000 |
2 |
| RXH-27-C |
CT-C-II |
240 |
0.9 |
30kw |
36 |
40 |
6900 |
±2 |
96 |
2300×2200×2000 |
4 |
| RXH-41-C |
CT-C-III |
360 |
1.35 |
45kw |
54 |
80 |
10350 |
±2 |
144 |
2300×3220×2000 |
6 |
| RXH-54-C |
CT-C-IV |
480 |
1.8 |
60kw |
72 |
100 |
13800 |
±2 |
192 |
4460×2200×2290 |
8 |
| RXH-5-C |
CT-C-O |
30 |
0.45 |
9kw |
5 |
5 |
3450 |
±2 |
8 |
1460×1100×1750 |
1 |
Product alias:Box type plastic resin dryer,box type Dehumidifing dryer |
box type Dehumidifing dryer Equipment principle
box type Dehumidifing dryer Box type plastic resin dryer
The air circulation system of the hot air circulation oven adopts a fan circulating air supply method, and the air circulation is uniform and efficient. The air source is driven by a circulating air motor (using a non-contact switch) to drive the wind wheel through the heater to send out the hot air, and then to the oven chamber through the air duct, and then suck the used air into the air duct to become the air source for recirculation. Heating use. Ensure the uniformity of indoor temperature. When the temperature value swings due to the opening and closing of the door, the air circulation system quickly restores the operating state until it reaches the temperature value set by the oven.
The hot air circulation oven is divided into five standard models: one-door bicycle oven, two-door two-car oven, two-door four-car oven, three-door six-car oven, four-door eight-car oven; in addition, Qibao drying can be provided according to customer requirements Non-standard customization.
Most of the hot air circulates in the box with high thermal efficiency and energy saving. The oven uses forced ventilation, and an adjustable air distribution board is installed in the oven to dry the materials evenly. The heat source of the oven can be steam, hot water, electricity, far infrared, and a wide range of options. The whole oven has low noise and stable operation. Automatic temperature control, convenient installation and maintenance.
It has a wide range of applications and can dry various materials. It is a universal drying equipment. The arc angle close welding of the inner tank of the oven facilitates the circulation of hot air and is convenient for online cleaning and sterilization. The working principle of this basic solution is: pour the cleaned and crushed plastic into the feeding box, start the motor, and the motor drives the first fan to rotate. When the first fan rotates, a large amount of airflow is generated, and the airflow gradually removes all plastic Blow into the spiral tube. Open the valve, the dry powder falls into the spiral tube, the airflow will blow the dry powder and the plastic at the same time, when the absorbent powder comes in contact with the water on the plastic, it will absorb the moisture. The output end of the motor can also drive the first gear to rotate, the first gear drives the second gear to rotate, the second gear drives the gear shaft and the worm on the gear shaft to rotate, the worm drives the worm wheel to rotate, and the worm wheel drives the rotating ring to rotate. When the plastic passes through the rotating ring with elastic strips, the elastic strips in the rotating ring will brush to the plastic and make the plastic rotate to change the direction, so that every surface of the plastic can contact with the dry powder and get dried. When the plastic passes through the rotating ring with a brush, the brush can brush off the dry powder contaminated on the plastic, and separate the plastic from the dry powder.
Product alias:Box type plastic resin dryer,box type Dehumidifing dryer |
box type Dehumidifing dryer application
Box type plastic resin dryer
The hot air circulation oven is a wide-applicable tray type intermittent general drying equipment, which is widely used in the heating, curing, drying and dewatering of industrial raw materials or products such as pharmaceuticals, chemicals, food, and light industry. For example: drying of raw materials, herbal medicines, powders, granules, crude drugs, pharmaceutical packaging bottles, pigments, dyes, dehydrated vegetables, food, plastic resins, electrical components, paper, fur, wool, salts, catalysts and other materials.
It is widely applicable to the drying of any plastic raw materials, and can dry materials of different materials and colors at the same time. It is especially suitable for drying materials that require high temperature accuracy, low dosage, and various colors. It is also suitable for preheating or drying in food, pharmaceutical, electronics, electroplating and other industries.
1. Using PI temperature control to accurately control the drying temperature. Integrate temperature and time control into one, 2. It is convenient to set the drying parameters of various materials.
3. High-quality thermal insulation materials and high-sealing design avoid unnecessary energy loss.
5. Adjustable air inlet.
6. Motor overload protection, phase sequence protection.
Working principle of box dryer:
Put the material to be dried into the movable tray. When the power is turned on, the powerful wind wheel starts to force the air entering from the air inlet to blow to the electric heating tube. The air is heated by the electric heating tube and passes through the holed partition. The wall is evenly blown to the material, and the air carrying moisture will be drawn out of the oven by the top moisture exhaust fan. Such repeated cycles can achieve the effect of dehumidification and drying.
box type Dehumidifing dryerThis is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
Product alias:Box type plastic resin dryer,box type Dehumidifing dryer |
box type Dehumidifing dryer Precautions
box type Dehumidifing dryer The box dryer should be cleaned and maintained regularly, especially the granulating oven and dryer should not be checked every day. Some pharmaceutical companies need to work in three shifts. It is recommended that each shift be controlled within 6 hours.
It is necessary to strengthen the management of safe operation of employees, safeguard the vital interests of employees, and ensure the smooth progress of production. It is strictly forbidden to work after drinking, lack of sleep, and work in a trance, and other influences on work.
Product alias:Box type plastic resin dryer,box type Dehumidifing dryer |
|
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274