| Honeycomb dehumidifier dryer Details description |
 |
| product name：Honeycomb dehumidifier dryer |
| release time:2020-09-12 |
| Numbering:Plastic dehumidifier-001 |
| Brand:wto-btb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:wto-btb |
| patent:wto-btb |
| Producing country:china |
| simple description:Plastic dehumidifiers are used to dehumidify plastics or resins to achieve drying and improve product quality, such as: PC, PET, PE, TPU, PPO and other materials |
| Product alias:Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier，Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer Honeycomb dehumidifier dryer |
|
| Honeycomb dehumidifier dryer Product introduction |
|
Honeycomb dehumidifier dryer parameter
Honeycomb dehumidifier dryer There are many models of plastic dehumidifiers, and different parameters are set according to different products. The following is a general parameter table:
| Model |
Drying Air Volume |
Drying Blower Power |
Regeration Fan |
Renewable electric |
Cooling nozzle |
out/in wind dia. |
Dimensions |
Approx.Net Weight |
| |
(m^3/hr) |
（KW） |
(KW) |
(KW) |
(inch) |
（inch) |
(cm)LxWxh |
（KG) |
| HF-80 |
80 |
0.75 |
0.2 |
3.8 |
3/4" |
2 |
82×55×128 |
145 |
| HF-120 |
120 |
1.1 |
0.375 |
3.8 |
3/4" |
2 |
82×55×128 |
170 |
| HF-150 |
150 |
1.5 |
0.375 |
5.4 |
3/4" |
2 |
82×55×128 |
170 |
| HF-200 |
200 |
2.2 |
0.375 |
5.4 |
3/4" |
2.5 |
105×66×153 |
265 |
| HF-300 |
300 |
3.8 |
0.75 |
7.2 |
3/4" |
3 |
126×70×170 |
285 |
| HF-400 |
400 |
5.5 |
0.75 |
7.2 |
3/4" |
3 |
126×70×170 |
330 |
| HF-500 |
500 |
7.5 |
1.5 |
10 |
3/4" |
4 |
130×90×180 |
350 |
| HF-700 |
700 |
2.2 |
2.2 |
12 |
3/4" |
4 |
130×90×180 |
480 |
| HF-1000 |
1000 |
3.7 |
2.2 |
12 |
3/4" |
5 |
168×125×190 |
700 |
| HF-1200 |
1200 |
3.7 |
2.2 |
12 |
3/4" |
6 |
168×125×190 |
860 |
| HF-1500 |
1500 |
5.5 |
2.2 |
15 |
3/4" |
6 |
168×125×190 |
1100 |
| HF-2000 |
2000 |
5.5 |
2.2 |
15 |
11/4" |
8 |
210×141×196 |
1300 |
| HF-2000 |
2000 |
3.7x2 |
2.2*2 |
12*2 |
11/4" |
8 |
210×141×196 |
1400 |
| HF-3000 |
3000 |
5.5x2 |
2.2*2 |
15*2 |
11/4" |
8 |
224×220×210 |
1600 |
| HF-4000 |
4000 |
7.5x2 |
2.2*2 |
20*2 |
11/4" |
12 |
224×220×210 |
2200 |
Product alias:Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier，Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer |
Honeycomb dehumidifier dryer Equipment principle
Honeycomb dehumidifier dryer 1. The unit has high air pressure and uses top-out air to supply air.
2. The control part adopts advanced control components, which has the characteristics of high control precision and convenient adjustment.
3. The use of industrial fans has a long air supply distance, which is conducive to uniform temperature and humidity distribution in the room
4. The compressor is placed in the indoor unit, the whole system is more reliable, and it is equipped with high and low pressure gauges, which is convenient for equipment maintenance and repair
5. The original scroll type fully enclosed compressor is adopted, which is highly efficient and energy-saving
6. Taking into account the complex changes of the working environment, the system is equipped with complete automatic protection functions, such as high and low pressure protection, and fluorine deficiency related protection.
7. Control system:
Electronic microcomputer temperature and humidity controller: digital temperature and humidity display, user parameter setting, easy operation and precise control; supporting high-precision temperature and humidity sensor, can automatically realize temperature and humidity control.
1. This machine adopts P.I.D. temperature control system, which can accurately control the regeneration temperature;
2. This series of dehumidification system adopts double cooler structure to ensure lower return air temperature and dew point;
3. Dry electric heating and temperature control meter are optional, and the drying barrel can be used to dehumidify and dry raw materials;
4. A return air filter is installed inside to ensure that the honeycomb wheel is not polluted by raw material dust.
TD-H series honeycomb rotary dehumidifier is mainly used for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. The honeycomb wheel used by our company can reach -40℃ under ideal conditions; the whole series adopt PID temperature control system as standard equipment, and also provide PLC control with LCD control touch man-machine interface for purchase, providing real-time The dew point meter that monitors the dehumidification effect of the machine is optional. There are 14 models in this series, and the maximum drying air volume can reach 4000m3/hr.
Product alias:Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier，Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer |
Honeycomb dehumidifier dryer application
Plastic dehumidifiers are mainly suitable for underground engineering, national defense engineering, archives, libraries, factory workshops, warehouses, computer rooms, and environments that require temperature and humidity. The temperature-adjustable dehumidifier can automatically adjust temperature, cool down and dehumidify. The temperature-adjustable dehumidifier integrates dehumidification and refrigeration functions with adjustable cooling capacity, which is especially suitable for dehumidifying places in high temperature and high humidity environments with large thermal load changes. The unit automatically runs in the cold air dehumidification mode, and the heat generated by the unit is dissipated into the outdoor atmosphere through the outdoor unit; in the low temperature, cold and humid environment, the unit automatically runs in dehumidification conditions. The cooling dehumidifier has a refrigeration function while reducing humidity, but the refrigeration function is not adjustable. It is suitable for dehumidification occasions with large heat load and no relative humidity requirements.
The following are the corresponding parameters of general plastic or resin materials：
|
Plastic material |
Dryer |
Density
(kg/dm3) |
Drying time(h) |
Drying temperature
(℃) |
Atmospheric flow
(m3/kg） |
Moulding moisture content |
Initial moisture contnt（%） |
|
ABS |
√ |
0.55 |
2-3 |
85 |
2 |
<0.020 |
< 0.2 |
|
CAB |
√ |
0.60 |
2-3 |
70 |
2 |
<0.020 |
< 0.6 |
|
EVA(2) |
√ |
0.60 |
2-3 |
90-105 |
1.8 |
- |
- |
|
EVOH |
√ |
0.60 |
2-3 |
90-105 |
2 |
- |
- |
|
LM(4) |
√ |
0.50 |
3 |
600 |
2 |
<0.080 |
<0.2 |
|
LCP |
√ |
0.80 |
3-4 |
150 |
2.2 |
< 0.01 |
<0.05 |
|
PA11 |
√ |
0.60 |
3-5 |
70-80 |
2 |
- |
0.6-1.2* |
|
PA6.46.6 |
√ |
0.60 |
4-6 |
70-80 |
2 |
0.15-0.02* |
0.6-1.2* |
|
PAI |
√ |
0.85 |
6-8 |
180 |
2 |
<0.02 |
- |
|
PAR |
√ |
0.70 |
5-6 |
120 |
2 |
<0.02 |
- |
|
PBT |
√ |
0.80 |
3-4 |
130-140 |
2.2 |
<0.02 |
< 0.15 |
|
PC |
√ |
0.65 |
2-3 |
120 |
2 |
< 0.02 |
< 0.3 |
|
PC/ABS |
√ |
0.65 |
42798 |
100 |
2 |
< 0.020 |
<0.1 |
|
PC/PBT |
√ |
0.75 |
3-4 |
110 |
2.2 |
- |
- |
|
PE.HDEPE.LDPE black3% |
√ |
0.50 |
1 |
85 |
1.6 |
<0.01 |
<0.02 |
|
PE.HDEPE.LDPE black40% |
√ |
0.70 |
2-3 |
80-90 |
2 |
<0.02 |
<0.2 |
|
PEEK |
√ |
0.80 |
3-4 |
150-160 |
2.2 |
<0.05 |
<00.1 |
|
PE(1)(3) |
√ |
0.75 |
4-5 |
140-160 |
2.5 |
<0.01 |
<0.2 |
|
PEN(1)(3) |
√ |
0.86 |
5-6 |
150-170 |
3 |
<0.005 |
- |
|
PES |
√ |
0.80 |
3-4 |
150-180 |
2 |
<0.05 |
0.35 |
|
PET |
√ |
0.84 |
5-6 |
160-180 |
3 |
<0.003 |
< 0.2 |
|
PETG |
√ |
0.74 |
4-5 |
65 |
3.5 |
<0.01 |
<0.1 |
|
PI |
√ |
0.70 |
2-3 |
120 |
2.2 |
<0.02 |
- |
|
PMMA- |
√ |
0.65 |
3-4 |
80 |
3 |
< 0.02 |
<0.3 |
|
POM |
√ |
0.85 |
2-3 |
90-100 |
2 |
- |
<0.15 |
|
PP |
√ |
0.50 |
1 |
80-90 |
2 |
- |
- |
|
PPO |
√ |
0.55 |
2 |
100-110 |
2 |
<0.01 |
- |
|
PPS |
√ |
0.80 |
2-3 |
130-140 |
2 |
<0.01 |
<0.03 |
|
PS[GPPS.EPS.HIPS] |
√ |
0.55 |
1 |
80 |
1.7 |
<0.02 |
<0.05 |
|
PSU |
√ |
0.80 |
3-4 |
120-130 |
2 |
<0.05 |
<0.1 |
|
PIT |
√ |
0.80 |
5-6 |
130-150 |
3 |
<0.05 |
<0.2 |
|
PUR |
√ |
0.75 |
2-3 |
70-90 |
2 |
<0.02 |
- |
|
PVC |
√ |
0.85 |
1 |
70-80 |
1.4 |
<0.02 |
- |
|
SAN |
√ |
0.55 |
2-3 |
80 |
2 |
<0.02 |
<0.1 |
|
SB |
√ |
0.60 |
1-2 |
80 |
2 |
<0.02 |
- |
|
TPE |
√ |
0.65 |
2-3 |
110 |
2.2 |
<0.05 |
<0.3 |
|
TPE |
√ |
0.65 |
2-3 |
80 |
2.2 |
< 0.1 |
- |
|
TPO |
√ |
0.55 |
3 |
70-90 |
2 |
- |
- |
|
TPU |
√ |
0.75 |
2-3 |
70-100 |
2 |
< 0.02 |
- |
Honeycomb dehumidifier dryerThis is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Honeycomb dehumidifier dryer,Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
Product alias:Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier，Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer |
Honeycomb dehumidifier dryer Precautions
Honeycomb dehumidifier dryer 1. Under normal circumstances, the dehumidifier should be placed in the center, leaving enough space around, and the air inlet and outlet of the dehumidifier should not be covered by obstacles to keep the air unblocked.
2. Do not pull the power cord of the dehumidifier forcefully to move the dehumidifier during use.
3. When using the dehumidifier, the airtightness of the room should be good, otherwise, the dehumidification effect will not be obvious, and it will increase the load of the dehumidifier and affect the service life of the dehumidifier.
4. At present, most dehumidifiers on the market are equipped with computer automatic control systems, with four-speed fuzzy control gears. Except for the first gear when shutting down, they have suitable humidity (relative humidity: 70%-60%) and dry (relative humidity: 60%-50%) and continuous dehumidification (relative humidity: the lowest can reach 35%). When the indoor humidity is higher than the humidity of the corresponding selected gear, the machine will automatically start dehumidification; when the water tank is full, the machine will automatically stop working, and The water level indicator light is on to remind that the water tank is full, and the water must be poured out before the machine can operate again.
5. When the machine body must be moved, unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to let it stand for 4 to 6 hours before turning it on. Because the compressor pipeline of the dehumidifier contains refrigerant, after being moved, the refrigerant can only return to its original position after a period of time.
Product alias:Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier，Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer |
|
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274