| EVA(2) injection molding dryer Details description |
 |
| product name：EVA(2) injection molding dryer |
| release time:2020-10-17 |
| Numbering:EVA(2) injection molding dryer |
| Brand:wto-btb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:wto-btb |
| patent:wto-btb |
| Producing country: |
| simple description:EVA(2) dehumidifying dryer |
| Product alias:EVA(2) dehumidifying dryer |
|
| EVA(2) injection molding dryer Product introduction |
|
EVA(2) injection molding dryer parameter
EVA(2) dehumidifying dryerProduct alias:EVA(2) dehumidifying dryer |
EVA(2) injection molding dryer Equipment principle
EVA(2) injection molding dryer EVA(2) injection molding dryer The working principle of this basic solution is: pour the cleaned and crushed plastic into the feeding box, start the motor, and the motor drives the first fan to rotate. When the first fan rotates, a large amount of airflow is generated, and the airflow gradually removes all plastic Blow into the spiral tube. Open the valve, the dry powder falls into the spiral tube, the airflow will blow the dry powder and the plastic at the same time, when the absorbent powder comes in contact with the water on the plastic, it will absorb the moisture. The output end of the motor can also drive the first gear to rotate, the first gear drives the second gear to rotate, the second gear drives the gear shaft and the worm on the gear shaft to rotate, the worm drives the worm wheel to rotate, and the worm wheel drives the rotating ring to rotate. When the plastic passes through the rotating ring with elastic strips, the elastic strips in the rotating ring will brush to the plastic and make the plastic rotate to change the direction, so that every surface of the plastic can contact with the dry powder and get dried. When the plastic passes through the rotating ring with a brush, the brush can brush off the dry powder contaminated on the plastic, and separate the plastic from the dry powder.
Product alias:EVA(2) dehumidifying dryer |
EVA(2) injection molding dryer application
EVA(2) dehumidifying dryer
EVA(2) injection molding dryerThis is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
Product alias:EVA(2) dehumidifying dryer |
EVA(2) injection molding dryer Precautions
EVA(2) injection molding dryer EVA(2) injection molding dryer
Product alias:EVA(2) dehumidifying dryer |
|
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274