| saving Dehumidifying dryer Details description |
 |
| product name：saving Dehumidifying dryer |
| release time:2020-09-15 |
| Numbering:Energy-saving dehumidification |
| Brand:wto-btb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:wto-btb |
| patent:wto-btb |
| Producing country:china |
| simple description:saving Plastic dryer,Energy-saving dehumidification dryer |
| Product alias:Dehumidifying dryer,saving Plastic dryer,Energy-saving dehumidification dryer，Dehumidifying dryer,Plastic desiccant dryer,Plastic dehumidifier.Plastic dryer.Resin dryer.Resin dehumidifier saving Dehumidifying dryer |
|
| saving Dehumidifying dryer Product introduction |
|
saving Dehumidifying dryer parameter
saving Dehumidifying dryer
|
model |
Dehumidification air volume
CMH |
Dehumidification motor
KW |
Regenerative motor
KW |
Regenerative heater
KW |
Air inlet and outlet
INCH |
Voltage
PHASE |
Dimensions MM |
|
DAD-50 |
50 |
0.37 |
0.18 |
2.0 |
2.0 |
220-380VAC
φ3.50HZ |
650(C)×600(W)×1100(H) |
|
DAD-80 |
80 |
0.55 |
0.18 |
2.7 |
2.0 |
690(L)×690(W)×1300(H) |
|
DAD-120 |
120 |
0.75 |
0.25 |
3.5 |
2.0 |
690(L)×690(W)×1300(H) |
|
DAD-150 |
150 |
1.1 |
0.37 |
4.5 |
2.5 |
765(L)×765(W)×1550(H) |
|
DAD-200 |
200 |
1.5 |
0.55 |
5 |
2.5 |
765(L)×765(W)×1550(H) |
|
DAD-300 |
300 |
2.2 |
0.75 |
7 |
3.0 |
900(L)×900(W)×1855(H) |
|
DAD-400 |
400 |
3.0 |
0.75 |
7 |
3.0 |
900(L)×900(W)×1855(H) |
|
DAD-500 |
500 |
3.8 |
1.1 |
10 |
4 |
1200(L)×1200(W)×2200(L) |
|
DAD-700 |
700 |
5.5 |
1.5 |
10 |
4 |
1200(L)×1200(W)×2200(L) |
Product alias:Dehumidifying dryer,saving Plastic dryer,Energy-saving dehumidification dryer，Dehumidifying dryer,Plastic desiccant dryer,Plastic dehumidifier.Plastic dryer.Resin dryer.Resin dehumidifier |
saving Dehumidifying dryer Equipment principle
saving Dehumidifying dryer Energy-saving three-in-one design system is more simplified, fully reducing the power consumption of the system, high efficiency, ultra-energy saving up to 60%,
And it is small in size and does not occupy space, especially suitable for dust-free workshops. No need to connect to cooling water, easy to move. Simple structure, machine reliability
high. The whole machine adopts microcomputer control, simple operation, stable performance, longer expected, dry air volume 30-200m³/hr. Total needle
For the manufacture of optical-grade products, we design an optical-grade energy-saving three-in-one dehumidification dryer to meet the different needs of customers.
1. The dehumidified air with a dew point of -50°C (one-way conveying) is continuously sent to the tightly filled vacuum dehumidification barrel to absorb the moisture of the raw materials in the barrel
dry;
2. This series is one-way air supply, no need to use regenerative dehumidifier. Quickly reduce the pressure in the double-cylinder dehumidification tower to reduce the dew point -50℃;
3. The water and oil removal filter filters and cleans the water and oil contained in the compressed air sent from the workshop, and then sends it to the dehumidification tower.
The composition of the three-in-one dehumidification dryer:
name |
Detailed introduction |
dehumidifier |
dehumidifier It is the main part of the three-machine integrated dehumidification dryer to automatically dehumidify the material to achieve drying
1. It adopts touch-sensitive human-machine interface, internally adopts PLC as main control, simple operation and stable operation;
2. Imported dehumidification wheel is adopted, with long service life;
3. Various temperature and conveying parameters can be set on the touch screen, which is flexible and convenient;
4. Various alarms are displayed on the touch screen, easy to monitor, safe and reliable;
5. With delayed start and stop functions, it can better protect the electric heater and motor. |
Drying hopper |
Drying hopper It is the main part of the material storage and supply of the three-in-one dehumidification dryer
1. The barrel body is made of SUS202 stainless steel, and the interior is ground and polished to avoid dust generation due to friction at dead corners;
2. Install an evacuation device at the bottom of the barrel to prevent residual material in the pipeline;
3. The double-layer barrel design saves energy;
4. The downward blowing design makes the temperature more uniform, and the blanking and heat dissipation are more balanced;
5. The cleaning door is designed to facilitate cleaning. |
Suction machine |
Suction machine It is the main part of the automatic feeding of the three-in-one dehumidification dryer
1. High-pressure closed motor is adopted, with strong conveying capacity and stable production;
2, using microcomputer control system, easy to control;
3. Equipped with an alarm device, when material shortage or failure occurs, an alarm will be issued to ensure that the equipment can operate normally. |
Product alias:Dehumidifying dryer,saving Plastic dryer,Energy-saving dehumidification dryer，Dehumidifying dryer,Plastic desiccant dryer,Plastic dehumidifier.Plastic dryer.Resin dryer.Resin dehumidifier |
saving Dehumidifying dryer application
The design system of the energy-saving plastic grease counting dryer is more simplified than ordinary dehumidifiers. It not only reduces the power consumption of the system, but also has high efficiency, ultra-energy saving and power saving up to 60%. It is small in size and does not take up space. It is especially suitable for dust-free workshop. No cooling water is required, so it is easy to move. The structure is simple and the machine has high reliability. The whole machine adopts microcomputer control, simple operation, stable performance, lower energy consumption, and dry air volume 30~200m3/hr. In addition, optical-grade energy-saving plastic grease dryers are designed for the production of optical-grade products to meet the different needs of customers.
It is caused by insufficient dehumidification of the plastic before molding. Especially high water-soaking plastics such as PET, PBT, PA, PC, etc. require ultra-low dew point Dewpoint-40℃ drying equipment. It can be dried to a moisture content below 0.02%, and solves the shortcomings of poor transparency, sprue sticking, bubbles, silver bars, cracks, poor dimensional stability, internal stress, and insufficient product physical strength.
 saving Dehumidifying dryerThis is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
saving Dehumidifying dryer,Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
Product alias:Dehumidifying dryer,saving Plastic dryer,Energy-saving dehumidification dryer，Dehumidifying dryer,Plastic desiccant dryer,Plastic dehumidifier.Plastic dryer.Resin dryer.Resin dehumidifier |
saving Dehumidifying dryer Precautions
saving Dehumidifying dryer 1. Dehumidifing-dryer The desiccant dryer should be cleaned frequently and kept clean. The dehumidifier should be placed in the center of the room. The air inlet and outlet of the refrigerated dryer should not be blocked by obstructions, and the air filter should be cleaned. When the ambient temperature is lower than 15℃, the water droplets attached to the evaporator surface will freeze and the dehumidifier effect will be weakened. If the ambient temperature exceeds 40℃, the pressure in the system will increase and the compressor will overload. At this time, the overload protector The circuit should be cut off, otherwise the compressor motor will be damaged. So the best temperature range for dehumidifier is 15℃~40℃. If the humidity in the air is below 30%, it will be too dry and uncomfortable, so a reliable humidity controller will control it to maintain the range of 50% to 60%. When in use, close doors and windows as much as possible to achieve dehumidification in the room. The body of the desiccant dryer must be placed flat, not tilted or turned sideways, to avoid machine failure or abnormal noise.
2. Dehumidifing-dryer The water storage in the desiccant dryer is too full. In order to avoid overflowing and contaminating the ground, when the machine body must be moved during operation, please unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to put it statically for four to six hours before starting to use it. Because the compressor pipeline in the dehumidifier contains cold coal, it must take four to six hours to return the cold coal to its original position after being moved.
3. Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine. Clean the air filter and wash it with water below 40°C; it is better to clean it with detergent. After washing off the dust, rinse it with water, dry it in the shade and put it back into the body. When cleaning the body, wipe it gently with a damp cloth; avoid directly splashing water for cleaning, so as not to damage the electrical insulation. Adhesives on the surface of the body can be cleaned with soap and water. Avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling paint or discoloration. Do not use thin rods or iron wires to dig out the inside of the machine to avoid malfunction or danger. Please unplug the power cord to maintain the life of the machine when it is out of power, not used for a long time, or when traveling.
Product alias:Dehumidifying dryer,saving Plastic dryer,Energy-saving dehumidification dryer，Dehumidifying dryer,Plastic desiccant dryer,Plastic dehumidifier.Plastic dryer.Resin dryer.Resin dehumidifier |
|
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274