Professional Plastic dryer, Plastic pellet dryer, Dehumidifying dryer manufacturer

Plastic dryer

Technology	principle	Video
Accessories	Industry Application	Cost budget
Equipment	maintenance	About us

Welcome to join the TPE,PET,PPO dryer website (dehumidifying dryer, TPE dryer,PET dryer,PPO dryer)! This is a global manufacturer and supplier of dehumidifying dryers, providing more comprehensive plastic dehumidification dryers, plastic dehumidifiers, plastic dryers, r TPE,PET,PPO dryer exchange platform website, including dehumidifying and drying from zero basis to TPE,PET,PPO dryer Machine equipment, TPE,PET,PPO dryer application, technology, assembly accessories, circuit design, TPE,PET,PPO dryer principle, dehumidifying dryer installation and other information!

TPE,PET,PPO dryer

TPE,PET,PPO Details description

product name：TPE,PET,PPO dryer

release time:2020-09-12

Numbering:TPE,PET,PPO dryer-001

Brand:wto-btb

Price:￥By function

weight :By function

unit weight:Kg/set

manufacturer:wto-btb

patent:wto-btb

Producing country:china

simple description:Plastic dehumidifiers are used to dehumidify plastics or resins to achieve drying and improve product quality, such as: PC, PET, PE, TPU, PPO and other materials

Product alias:TPE dryer,PET dryer,PPO dryer

TPE,PET,PPO Product introduction

TPE,PET,PPO dryer parameter

There are many models of plastic dehumidifiers, and different parameters are set according to different products. The following is a general parameter table:

Model	Drying Air Volume	Drying Blower Power	Regeration Fan	Renewable electric	Cooling nozzle	out/in wind dia.	Dimensions	Approx.Net Weight
	(m^3/hr)	（KW）	(KW)	(KW)	(inch)	（inch)	(cm)LxWxh	（KG)
HF-80	80	0.75	0.2	3.8	3/4"	2	82×55×128	145
HF-120	120	1.1	0.375	3.8	3/4"	2	82×55×128	170
HF-150	150	1.5	0.375	5.4	3/4"	2	82×55×128	170
HF-200	200	2.2	0.375	5.4	3/4"	2.5	105×66×153	265
HF-300	300	3.8	0.75	7.2	3/4"	3	126×70×170	285
HF-400	400	5.5	0.75	7.2	3/4"	3	126×70×170	330
HF-500	500	7.5	1.5	10	3/4"	4	130×90×180	350
HF-700	700	2.2	2.2	12	3/4"	4	130×90×180	480
HF-1000	1000	3.7	2.2	12	3/4"	5	168×125×190	700
HF-1200	1200	3.7	2.2	12	3/4"	6	168×125×190	860
HF-1500	1500	5.5	2.2	15	3/4"	6	168×125×190	1100
HF-2000	2000	5.5	2.2	15	11/4"	8	210×141×196	1300
HF-2000	2000	3.7x2	2.2*2	12*2	11/4"	8	210×141×196	1400
HF-3000	3000	5.5x2	2.2*2	15*2	11/4"	8	224×220×210	1600
HF-4000	4000	7.5x2	2.2*2	20*2	11/4"	12	224×220×210	2200

Honeycomb dehumidifier dryer，Plastic dehumidifier,Plastic dryer,Plastic dehumidifier dryer,Honeycomb Dehumidifier，Resin dryer, resin dehumidifier, Honeycomb Dehumidifying dryer

Model	Capacity(kg)	Heater(kw)	Blower(w)	Overall Dimensions(cm)	Model suitable	Weight(kg)
MHD-12E	12	1.8	50	65X40X85	1oz	25
MHD-25E	25	3	90	75X50X105	3oz	35
MHD-50E	50	3.9	100	90X55X120	5-8oz	45
MHD-75E	75	3.9	100	95X60X130	8-10oz	50
MHD-100E	100	6	250	100X70X140	10-20oz	70
MHD-150E	150	6	350	110X75X160	15-20oz	80
MHD-200E	200	12	350	120X85X170	20-30oz	120
MHD-300E	3300	15	350	145X100X185	25-30oz	120
MHD-400E	400	18	550	150X105X200	30-40oz	230
MHD-500E	500	21	750	150X105X210	40-50oz	250
MHD-600E	600	21	750	150X105X220	40-50oz	250
MHD-800E	800	27	750	150X110X240	50-60oz	300
MHD-1000E	1000	30	1100	185X135X270	60oz以上	400
MHD-2000E	2000	60	5500	1480X1800X3600	60oz以上	780
MHD-3000E	3000	64	7500	1600X2010X4050	60oz	1150

Product alias:TPE,PET,PPO material mixture dryer,TPE,PET,PPO polymer dryer

TPE,PET,PPO dryer Equipment principle

TPE,PET,PPO dryer Honeycomb dehumidifier dryer
1. The unit has high air pressure and uses top-out air to supply air.
2. The control part adopts advanced control components, which has the characteristics of high control precision and convenient adjustment.
3. The use of industrial fans has a long air supply distance, which is conducive to uniform temperature and humidity distribution in the room
4. The compressor is placed in the indoor unit, the whole system is more reliable, and it is equipped with high and low pressure gauges, which is convenient for equipment maintenance and repair
5. The original scroll type fully enclosed compressor is adopted, which is highly efficient and energy-saving
6. Taking into account the complex changes of the working environment, the system is equipped with complete automatic protection functions, such as high and low pressure protection, and fluorine deficiency related protection.
TPE dryer,PET dryer,PPO dryer

7. Control system:
Electronic microcomputer temperature and humidity controller: digital temperature and humidity display, user parameter setting, easy operation and precise control; supporting high-precision temperature and humidity sensor, can automatically realize temperature and humidity control.
1. This machine adopts P.I.D. temperature control system, which can accurately control the regeneration temperature;
2. This series of dehumidification system adopts double cooler structure to ensure lower return air temperature and dew point;
3. Dry electric heating and temperature control meter are optional, and the drying barrel can be used to dehumidify and dry raw materials;
4. A return air filter is installed inside to ensure that the honeycomb wheel is not polluted by raw material dust.
TD-H series honeycomb rotary dehumidifier is mainly used for high-efficiency dehumidification of engineering plastics with strong hygroscopicity. The honeycomb wheel used by our company can reach -40℃ under ideal conditions; the whole series adopt PID temperature control system as standard equipment, and also provide PLC control with LCD control touch man-machine interface for purchase, providing real-time The dew point meter that monitors the dehumidification effect of the machine is optional. There are 14 models in this series, and the maximum drying air volume can reach 4000m3/hr. This is a mechanical equipment used for automatic dehumidification and intelligent drying of TPE,PET,PPO material, TPE,PET,PPO material mixture, TPE,PET,PPO polymer and several material mixtures;
TPE,PET,PPO material is a plastic (resin) material. Because most TPE,PET,PPO engineering plastics are hygroscopic, coupled with the influence of weather and regional climate, it is easy for the plastic particles to become too wet to achieve the molding effect. In addition, in the previous granulation process, the plastic raw materials are different, so the moisture content and hygroscopicity are also different. Therefore, during the molding process, bubbles, silver bars, poor transparency, cracks and poor stability may occur, which seriously affect the quality of the product. The air duct of the TPE,PET,PPO desiccant dryer adopts a closed circulation system, which is not affected by the external weather. It can dry materials well in dry weather or wet weather without reversing moisture, and has high product molding quality.
The TPE,PET,PPO dryer first inhales the air in the environment to remove the moisture in the low dew point air, and then heats the dry air into one or more standard drying hoppers, thereby improving the drying efficiency and shortening the drying time. If the traditional hot air blower uses the moisture in the outside air to dry the material, it is difficult to achieve the drying effect. In addition, after the plastic or polymer is taken out of the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere. The traditional hot air blower cannot prevent the plastic from continuing to absorb moisture, and the drying effect is poor.
The use of TPE,PET,PPO material dryer can be divided into independent type and centralized type.
An independent TPE,PET,PPO dryer usually includes a dryer host, a drying barrel and a suction machine. The stand-alone dehumidification dryer is suitable for a small amount of various drying, and its advantages are high drying efficiency and convenient and quick material change.
The centralized TPE,PET,PPO dryer includes a drying host and several drying barrels.
Each drying barrel has an independent heating controller, which can dry several different raw materials at the same time, and cooperates with the air volume control valve to control the air volume of each drying barrel, which is suitable for mass production of plastics.
The working principle of this basic solution is: pour the cleaned and crushed plastic into the feeding box, start the motor, and the motor drives the first fan to rotate. When the first fan rotates, a large amount of airflow is generated, and the airflow gradually removes all plastic Blow into the spiral tube. Open the valve, the dry powder falls into the spiral tube, the airflow will blow the dry powder and the plastic at the same time, when the absorbent powder comes in contact with the water on the plastic, it will absorb the moisture. The output end of the motor can also drive the first gear to rotate, the first gear drives the second gear to rotate, the second gear drives the gear shaft and the worm on the gear shaft to rotate, the worm drives the worm wheel to rotate, and the worm wheel drives the rotating ring to rotate. When the plastic passes through the rotating ring with elastic strips, the elastic strips in the rotating ring will brush to the plastic and make the plastic rotate to change the direction, so that every surface of the plastic can contact with the dry powder and get dried. When the plastic passes through the rotating ring with a brush, the brush can brush off the dry powder contaminated on the plastic, and separate the plastic from the dry powder.

Product alias:TPE dryer,PET dryer,PPO dryer

TPE,PET,PPO dryer application

Plastic dehumidifiers are mainly suitable for underground engineering, national defense engineering, archives, libraries, factory workshops, warehouses, computer rooms, and environments that require temperature and humidity. The temperature-adjustable dehumidifier can automatically adjust temperature, cool down and dehumidify. The temperature-adjustable dehumidifier integrates dehumidification and refrigeration functions with adjustable cooling capacity, which is especially suitable for dehumidifying places in high temperature and high humidity environments with large thermal load changes. The unit automatically runs in the cold air dehumidification mode, and the heat generated by the unit is dissipated into the outdoor atmosphere through the outdoor unit; in the low temperature, cold and humid environment, the unit automatically runs in dehumidification conditions. The cooling dehumidifier has a refrigeration function while reducing humidity, but the refrigeration function is not adjustable. It is suitable for dehumidification occasions with large heat load and no relative humidity requirements.
The following are the corresponding parameters of general plastic or resin materials：Honeycomb dehumidifier dryer

Plastic material	Dryer	Density (kg/dm³)	Drying time(h)	Drying temperature (℃)	Atmospheric flow (m³/kg）	Moulding moisture content	Initial moisture contnt（%）
ABS	√	0.55	2-3	85	2	<0.020	< 0.2
CAB	√	0.60	2-3	70	2	<0.020	< 0.6
EVA(2)	√	0.60	2-3	90-105	1.8	-	-
EVOH	√	0.60	2-3	90-105	2	-	-
LM(4)	√	0.50	3	600	2	<0.080	<0.2
LCP	√	0.80	3-4	150	2.2	< 0.01	<0.05
PA11	√	0.60	3-5	70-80	2	-	0.6-1.2*
PA6.46.6	√	0.60	4-6	70-80	2	0.15-0.02*	0.6-1.2*
PAI	√	0.85	6-8	180	2	<0.02	-
PAR	√	0.70	5-6	120	2	<0.02	-
PBT	√	0.80	3-4	130-140	2.2	<0.02	< 0.15
PC	√	0.65	2-3	120	2	< 0.02	< 0.3
PC/ABS	√	0.65	42798	100	2	< 0.020	<0.1
PC/PBT	√	0.75	3-4	110	2.2	-	-
PE.HDEPE.LDPE black3%	√	0.50	1	85	1.6	<0.01	<0.02
PE.HDEPE.LDPE black40%	√	0.70	2-3	80-90	2	<0.02	<0.2
PEEK	√	0.80	3-4	150-160	2.2	<0.05	<00.1
PE(1)(3)	√	0.75	4-5	140-160	2.5	<0.01	<0.2
PEN(1)(3)	√	0.86	5-6	150-170	3	<0.005	-
PES	√	0.80	3-4	150-180	2	<0.05	0.35
PET	√	0.84	5-6	160-180	3	<0.003	< 0.2
PETG	√	0.74	4-5	65	3.5	<0.01	<0.1
PI	√	0.70	2-3	120	2.2	<0.02	-
PMMA-	√	0.65	3-4	80	3	< 0.02	<0.3
POM	√	0.85	2-3	90-100	2	-	<0.15
PP	√	0.50	1	80-90	2	-	-
PPO	√	0.55	2	100-110	2	<0.01	-
PPS	√	0.80	2-3	130-140	2	<0.01	<0.03
PS[GPPS.EPS.HIPS]	√	0.55	1	80	1.7	<0.02	<0.05
PSU	√	0.80	3-4	120-130	2	<0.05	<0.1
PIT	√	0.80	5-6	130-150	3	<0.05	<0.2
PUR	√	0.75	2-3	70-90	2	<0.02	-
PVC	√	0.85	1	70-80	1.4	<0.02	-
SAN	√	0.55	2-3	80	2	<0.02	<0.1
SB	√	0.60	1-2	80	2	<0.02	-
TPE	√	0.65	2-3	110	2.2	<0.05	<0.3
TPE	√	0.65	2-3	80	2.2	< 0.1	-
TPO	√	0.55	3	70-90	2	-	-
TPU	√	0.75	2-3	70-100	2	< 0.02	-

Application of Dehumidifying dryer on PET materials	Application of plastic dryer in bottle blowing	Application of plastic dryer in resin industry

Application of plastic dryer in PE industry	Application of plastic dryer in TPU industry	Application of plastic dryer in PPO industry

Central feeding system Dehumidifying dryer	Dehumidifying dryer for injection molding industry	Dehumidifying dryer for blow molding industry

TPE,PET,PPO dryer This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.

Product alias:TPE dryer,PET dryer,PPO dryer

TPE,PET,PPO dryer Precautions

TPE,PET,PPO dryer 1. Under normal circumstances, the dehumidifier should be placed in the center, leaving enough space around, and the air inlet and outlet of the dehumidifier should not be covered by obstacles to keep the air unblocked.
2. Do not pull the power cord of the dehumidifier forcefully to move the dehumidifier during use.Honeycomb dehumidifier dryer
3. When using the dehumidifier, the airtightness of the room should be good, otherwise, the dehumidification effect will not be obvious, and it will increase the load of the dehumidifier and affect the service life of the dehumidifier.
4. At present, most dehumidifiers on the market are equipped with computer automatic control systems, with four-speed fuzzy control gears. Except for the first gear when shutting down, they have suitable humidity (relative humidity: 70%-60%) and dry (relative humidity: 60%-50%) and continuous dehumidification (relative humidity: the lowest can reach 35%). When the indoor humidity is higher than the humidity of the corresponding selected gear, the machine will automatically start dehumidification; when the water tank is full, the machine will automatically stop working, and The water level indicator light is on to remind that the water tank is full, and the water must be poured out before the machine can operate again.
5. When the machine body must be moved, unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to let it stand for 4 to 6 hours before turning it on. Because the compressor pipeline of the dehumidifier contains refrigerant, after being moved, the refrigerant can only return to its original position after a period of time.

Maintenance of TPE,PET,PPO desiccant dryer:

1. Record the daily operation and maintenance of TPE,PET,PPO desiccant dryer and establish files;
2. Regularly train operators, especially new employees;
3. Regularly maintain and maintain the single machine in the system;
4. Regularly check for leaks in conveying pipelines, especially vacuum pipelines and compressed air lines;
5. Clean the dust on the electrical parts of the equipment regularly.

Maintenance of TPE,PET,PPO dryer:

1. During the drying process of the material, all parts of the equipment in contact with the material need to be cleaned and sterilized;
2. The best operating temperature range of TPE,PET,PPO desiccant dryer is 15℃～40℃ to avoid excessively low or high temperature, which will affect the dehumidification efficiency or damage the equipment;
3. Regularly clean the central filter in the desiccant dryer, and replace it if it is damaged;
4. Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine;
5. After cleaning the suction hopper and drying barrel, install them in place;
6. In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
Doing the above maintenance work on the TPE,PET,PPO dehumidification dryer can reduce the probability of equipment failure, reduce maintenance costs, and effectively extend the service life of the TPE,PET,PPO dryer.