| Resin PET Details description |
 |
| product name：Resin PET dryer |
| release time:2020-09-16 |
| Numbering:Resin PET Dryer -001 |
| Brand:wto-btb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:wto-btb |
| patent:wto-btb |
| Producing country: |
| simple description: resin dryer,standard plastic resin dryer：Dehumidify and dry plastic, resin, pet, ppo, pe, pc, tpu, tpe, and other plastics,standard resin dryer |
| Product alias:resin dryer,standard plastic resin dryer，plastic resin dryer， resin dryer，Dehumidify and dry plastic, resin, pet, ppo, pe, pc, tpu, tpe, and other plastics |
|
| Resin PET Product introduction |
|
Resin PET dryer parameter
resin dryer,Standard Dehumidifying Dryer
1. This series adopts the microcomputer P. I. D. temperature control system to control the temperature accurately;
2. Adopting Nigas brand full molecular sieve honeycomb dehumidification runner imported from Japan, the dehumidification effect is better and more stable;
3. Enlarged and equipped with detachable cooler, easy maintenance and lower return air temperature;
4. resin dryer,High-density return air filter to ensure that the honeycomb runner is not polluted by raw material dust;
5. Double-layer insulation and downward blowing stainless steel dryer;
6. The feeding system is equipped with an evacuation shutoff valve (quickly disassembled) to ensure that there is no residual material in the pipe;
7. Hot material conveying can be equipped with a closed conveying device of hot air loop, which can effectively avoid raw material pollution and moisture resurgence;
8. Optional optical grade hopper dryer to suit the production of optical grade and food grade products;
9. The filter is designed with a transparent window, which can observe the use of the filter and clean or replace it regularly;
10. The snap-on sealing plate design makes later maintenance and repair more convenient;
11. The dew point of the air after dehumidification can be as low as -40°C.
|
Model |
Capacity(kg) |
Heater(kw) |
Blower(w) |
Overall Dimensions(cm) |
Model suitable |
Weight(kg) |
|
MHD-12E |
12 |
1.8 |
50 |
65X40X85 |
1oz |
25 |
|
MHD-25E |
25 |
3 |
90 |
75X50X105 |
3oz |
35 |
|
MHD-50E |
50 |
3.9 |
100 |
90X55X120 |
5-8oz |
45 |
|
MHD-75E |
75 |
3.9 |
100 |
95X60X130 |
8-10oz |
50 |
|
MHD-100E |
100 |
6 |
250 |
100X70X140 |
10-20oz |
70 |
|
MHD-150E |
150 |
6 |
350 |
110X75X160 |
15-20oz |
80 |
|
MHD-200E |
200 |
12 |
350 |
120X85X170 |
20-30oz |
120 |
|
MHD-300E |
3300 |
15 |
350 |
145X100X185 |
25-30oz |
120 |
|
MHD-400E |
400 |
18 |
550 |
150X105X200 |
30-40oz |
230 |
|
MHD-500E |
500 |
21 |
750 |
150X105X210 |
40-50oz |
250 |
|
MHD-600E |
600 |
21 |
750 |
150X105X220 |
40-50oz |
250 |
|
MHD-800E |
800 |
27 |
750 |
150X110X240 |
50-60oz |
300 |
|
MHD-1000E |
1000 |
30 |
1100 |
185X135X270 |
60oz以上 |
400 |
|
MHD-2000E |
2000 |
60 |
5500 |
1480X1800X3600 |
60oz以上 |
780 |
|
MHD-3000E |
3000 |
64 |
7500 |
1600X2010X4050 |
60oz |
1150 |
Product alias:Resin PET material mixture dryer,Resin PET polymer dryer |
Resin PET dryer Equipment principle
Resin PET dryer resin dryer,Standard Dehumidifying Dryer
resin dryer,The standard plastic resin dryer is the most effective and economical model for drying plastic raw materials. It can dry raw materials that are wet due to packaging, transportation or recycling.
The hopper is made of stainless steel, with the functions of "hot air blowing down" and "cyclone exhaust" as well as a double-layer insulation barrel, which is especially suitable for drying engineering plastic materials with a dehumidifier.
The air blown by the drying fan becomes high-temperature dry air after drying and electric heating. Through the unique design of the lower blowing pipe, the hot air is evenly dispersed in the insulation barrel to dry the raw materials; the hot air recovery device is optional, and the air blown out is filtered and then dried The wind blows out, forming a closed loop.
Drying and dehumidifying part: The hot and humid air returned from the drying barrel is cooled and blown into the honeycomb runner. The moisture in the air is adsorbed by the runner and then desorbed by the regeneration heating air. The two airflows act on the runner at the same time, and with the rotation of the runner, the moisture in the air is continuously adsorbed and then desorbed by the regeneration air to be discharged, forming a stable low dew point air, which is heated to the plastic The drying temperature is blown into the drying barrel to form a closed cycle to dry the raw materials.
Suction part: Suction material is sucked into the dry bucket from the storage bucket or other storage container. When the reed switch of the vacuum hopper detects that there is no material, the suction motor runs to generate vacuum in the vacuum hopper. The raw materials in the bucket are sucked into the vacuum hopper due to the air pressure difference. When the suction time is completed, the suction motor stops running, and the raw materials fall into the drying bucket due to their own weight. The dried raw materials are pumped from the drying barrel to the photoelectric hopper or micro-motion hopper installed in the plastic molding machine. This is a mechanical equipment used for automatic dehumidification and intelligent drying of Resin PET material, Resin PET material mixture, Resin PET polymer and several material mixtures;
Resin PET material is a plastic (resin) material. Because most Resin PET engineering plastics are hygroscopic, coupled with the influence of weather and regional climate, it is easy for the plastic particles to become too wet to achieve the molding effect. In addition, in the previous granulation process, the plastic raw materials are different, so the moisture content and hygroscopicity are also different. Therefore, during the molding process, bubbles, silver bars, poor transparency, cracks and poor stability may occur, which seriously affect the quality of the product. The air duct of the Resin PET desiccant dryer adopts a closed circulation system, which is not affected by the external weather. It can dry materials well in dry weather or wet weather without reversing moisture, and has high product molding quality.
The Resin PET dryer first inhales the air in the environment to remove the moisture in the low dew point air, and then heats the dry air into one or more standard drying hoppers, thereby improving the drying efficiency and shortening the drying time. If the traditional hot air blower uses the moisture in the outside air to dry the material, it is difficult to achieve the drying effect. In addition, after the plastic or polymer is taken out of the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere. The traditional hot air blower cannot prevent the plastic from continuing to absorb moisture, and the drying effect is poor.
The use of Resin PET material dryer can be divided into independent type and centralized type.
An independent Resin PET dryer usually includes a dryer host, a drying barrel and a suction machine. The stand-alone dehumidification dryer is suitable for a small amount of various drying, and its advantages are high drying efficiency and convenient and quick material change.
The centralized Resin PET dryer includes a drying host and several drying barrels.
Each drying barrel has an independent heating controller, which can dry several different raw materials at the same time, and cooperates with the air volume control valve to control the air volume of each drying barrel, which is suitable for mass production of plastics.
The working principle of this basic solution is: pour the cleaned and crushed plastic into the feeding box, start the motor, and the motor drives the first fan to rotate. When the first fan rotates, a large amount of airflow is generated, and the airflow gradually removes all plastic Blow into the spiral tube. Open the valve, the dry powder falls into the spiral tube, the airflow will blow the dry powder and the plastic at the same time, when the absorbent powder comes in contact with the water on the plastic, it will absorb the moisture. The output end of the motor can also drive the first gear to rotate, the first gear drives the second gear to rotate, the second gear drives the gear shaft and the worm on the gear shaft to rotate, the worm drives the worm wheel to rotate, and the worm wheel drives the rotating ring to rotate. When the plastic passes through the rotating ring with elastic strips, the elastic strips in the rotating ring will brush to the plastic and make the plastic rotate to change the direction, so that every surface of the plastic can contact with the dry powder and get dried. When the plastic passes through the rotating ring with a brush, the brush can brush off the dry powder contaminated on the plastic, and separate the plastic from the dry powder.
Product alias:resin dryer,standard plastic resin dryer，plastic resin dryer， resin dryer，Dehumidify and dry plastic, resin, pet, ppo, pe, pc, tpu, tpe, and other plastics |
Resin PET dryer application
resin dryer,Standard Dehumidifying Dryer
Plastic resin dryers can be widely used in civil air defense engineering, tobacco factories, pharmaceutical factories, scientific research, industry, medical and health, instrumentation, commodity storage, underground engineering, and computer rooms, archives, warehouses and other high humidity places to prevent instruments, meters, Computers, telecommunications equipment, medicines, materials, etc. are damaged by moisture, rust, and mildew. It can work normally when the relative humidity of the environment is within the range of 35-95% and the ambient temperature is 5-38 degrees Celsius. It is mainly used in basements, archives, precision instrument rooms, workshops and warehouses of pharmaceutical factories, electronic factories, industry, storage, etc., which require high relative air humidity. It can improve product quality, humidity hazards, and mold hazards. Everywhere in daily life. Therefore, it is necessary to add dryers to the above-mentioned environment.
Resin PET dryer This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
Product alias:resin dryer,standard plastic resin dryer，plastic resin dryer， resin dryer，Dehumidify and dry plastic, resin, pet, ppo, pe, pc, tpu, tpe, and other plastics |
Resin PET dryer Precautions
Resin PET dryer resin dryer,Standard Dehumidifying Dryer
The water storage capacity of the standard plastic resin dryer is too full. To avoid overflowing and contaminating the ground, when you must move the body during operation, please unplug the power cord first, and then pour out the water in the water storage bucket. After moving the dehumidifier, it is best to put it statically for four to six hours before starting to use it. Because the compressor pipeline in the dehumidifier contains cold coal, it must take four to six hours to return the cold coal to its original position after being moved. Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine. Clean the air filter and wash it with water below 40°C; it is better to clean it with detergent. After washing off the dust, rinse it with water, dry it in the shade and put it back into the body.
When cleaning the body, wipe it gently with a damp cloth; avoid directly splashing water for cleaning, so as not to damage the electrical insulation. Adhesives on the surface of the body can be cleaned with soap and water. Avoid spraying with gasoline, petroleum spirit, solvent or spray insecticide to avoid peeling paint or discoloration. Do not use thin rods or iron wires to dig out the inside of the machine to avoid malfunction or danger. Please unplug the power cord to maintain the life of the machine when it is out of power, not used for a long time, or when traveling.
In fact, it is also very useful to connect to our lives. The standard plastic resin dryer consists of a compressor, a fan, and other components. The fan draws air in, and the heat exchanger condenses the moisture into droplets and then discharges it.Maintenance of Resin PET desiccant dryer:
1. Record the daily operation and maintenance of Resin PET desiccant dryer and establish files;
2. Regularly train operators, especially new employees;
3. Regularly maintain and maintain the single machine in the system;
4. Regularly check for leaks in conveying pipelines, especially vacuum pipelines and compressed air lines;
5. Clean the dust on the electrical parts of the equipment regularly.
Maintenance of Resin PET dryer:
1. During the drying process of the material, all parts of the equipment in contact with the material need to be cleaned and sterilized;
2. The best operating temperature range of Resin PET desiccant dryer is 15℃～40℃ to avoid excessively low or high temperature, which will affect the dehumidification efficiency or damage the equipment;
3. Regularly clean the central filter in the desiccant dryer, and replace it if it is damaged;
4. Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine;
5. After cleaning the suction hopper and drying barrel, install them in place;
6. In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
Doing the above maintenance work on the Resin PET dehumidification dryer can reduce the probability of equipment failure, reduce maintenance costs, and effectively extend the service life of the Resin PET dryer.
Product alias:Resin PET dryer,Resin PET material mixture dryer,Resin PET polymer dryer |
|
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274