| PE.HDEPE. LDPE black40% Details description |
 |
| product name：PE.HDEPE. LDPE black40% pellet dryer |
| release time:2020-10-17 |
| Numbering:PE.HDEPE. LDPE black40% pellets dryer-001 |
| Brand:wto-btb |
| Price:￥By function |
| weight :By function |
| unit weight:Kg/set |
manufacturer:wto-btb |
| patent:wto-btb |
| Producing country: |
| simple description:PE.HDEPE. LDPE black40% Dehumidifying dryer |
| Product alias:PE.HDEPE. LDPE black40% Dehumidifying dryer,PE.HDEPE. LDPE black40% pellet dryer |
|
| PE.HDEPE. LDPE black40% Product introduction |
|
PE.HDEPE. LDPE black40% pellets dryer parameter
PE.HDEPE. LDPE black40% dryer
|
Model |
Capacity(kg) |
Heater(kw) |
Blower(w) |
Overall Dimensions(cm) |
Model suitable |
Weight(kg) |
|
MHD-12E |
12 |
1.8 |
50 |
65X40X85 |
1oz |
25 |
|
MHD-25E |
25 |
3 |
90 |
75X50X105 |
3oz |
35 |
|
MHD-50E |
50 |
3.9 |
100 |
90X55X120 |
5-8oz |
45 |
|
MHD-75E |
75 |
3.9 |
100 |
95X60X130 |
8-10oz |
50 |
|
MHD-100E |
100 |
6 |
250 |
100X70X140 |
10-20oz |
70 |
|
MHD-150E |
150 |
6 |
350 |
110X75X160 |
15-20oz |
80 |
|
MHD-200E |
200 |
12 |
350 |
120X85X170 |
20-30oz |
120 |
|
MHD-300E |
3300 |
15 |
350 |
145X100X185 |
25-30oz |
120 |
|
MHD-400E |
400 |
18 |
550 |
150X105X200 |
30-40oz |
230 |
|
MHD-500E |
500 |
21 |
750 |
150X105X210 |
40-50oz |
250 |
|
MHD-600E |
600 |
21 |
750 |
150X105X220 |
40-50oz |
250 |
|
MHD-800E |
800 |
27 |
750 |
150X110X240 |
50-60oz |
300 |
|
MHD-1000E |
1000 |
30 |
1100 |
185X135X270 |
60oz以上 |
400 |
|
MHD-2000E |
2000 |
60 |
5500 |
1480X1800X3600 |
60oz以上 |
780 |
|
MHD-3000E |
3000 |
64 |
7500 |
1600X2010X4050 |
60oz |
1150 |
Product alias:PE.HDEPE. LDPE black40% material mixture dryer,PE.HDEPE. LDPE black40% pellet polymer dryer |
PE.HDEPE. LDPE black40% pellet dryer Equipment principle
PE.HDEPE. LDPE black40% pellet dryer PE.HDEPE. LDPE black40% Dehumidifying dryer This is a mechanical equipment used for automatic dehumidification and intelligent drying of PE.HDEPE. LDPE black40% material, PE.HDEPE. LDPE black40% material mixture, PE.HDEPE. LDPE black40% polymer and several material mixtures;
PE.HDEPE. LDPE black40% material is a plastic (resin) material. Because most PE.HDEPE. LDPE black40% engineering plastics are hygroscopic, coupled with the influence of weather and regional climate, it is easy for the plastic particles to become too wet to achieve the molding effect. In addition, in the previous granulation process, the plastic raw materials are different, so the moisture content and hygroscopicity are also different. Therefore, during the molding process, bubbles, silver bars, poor transparency, cracks and poor stability may occur, which seriously affect the quality of the product. The air duct of the PE.HDEPE. LDPE black40% desiccant dryer adopts a closed circulation system, which is not affected by the external weather. It can dry materials well in dry weather or wet weather without reversing moisture, and has high product molding quality.
The PE.HDEPE. LDPE black40% dryer first inhales the air in the environment to remove the moisture in the low dew point air, and then heats the dry air into one or more standard drying hoppers, thereby improving the drying efficiency and shortening the drying time. If the traditional hot air blower uses the moisture in the outside air to dry the material, it is difficult to achieve the drying effect. In addition, after the plastic or polymer is taken out of the moisture-proof sealed packaging bag and exposed to the atmosphere, it will begin to absorb moisture from the atmosphere. The traditional hot air blower cannot prevent the plastic from continuing to absorb moisture, and the drying effect is poor.
The use of PE.HDEPE. LDPE black40% material dryer can be divided into independent type and centralized type.
An independent PE.HDEPE. LDPE black40% dryer usually includes a dryer host, a drying barrel and a suction machine. The stand-alone dehumidification dryer is suitable for a small amount of various drying, and its advantages are high drying efficiency and convenient and quick material change.
The centralized PE.HDEPE. LDPE black40% dryer includes a drying host and several drying barrels.
Each drying barrel has an independent heating controller, which can dry several different raw materials at the same time, and cooperates with the air volume control valve to control the air volume of each drying barrel, which is suitable for mass production of plastics.
The working principle of this basic solution is: pour the cleaned and crushed plastic into the feeding box, start the motor, and the motor drives the first fan to rotate. When the first fan rotates, a large amount of airflow is generated, and the airflow gradually removes all plastic Blow into the spiral tube. Open the valve, the dry powder falls into the spiral tube, the airflow will blow the dry powder and the plastic at the same time, when the absorbent powder comes in contact with the water on the plastic, it will absorb the moisture. The output end of the motor can also drive the first gear to rotate, the first gear drives the second gear to rotate, the second gear drives the gear shaft and the worm on the gear shaft to rotate, the worm drives the worm wheel to rotate, and the worm wheel drives the rotating ring to rotate. When the plastic passes through the rotating ring with elastic strips, the elastic strips in the rotating ring will brush to the plastic and make the plastic rotate to change the direction, so that every surface of the plastic can contact with the dry powder and get dried. When the plastic passes through the rotating ring with a brush, the brush can brush off the dry powder contaminated on the plastic, and separate the plastic from the dry powder.
Product alias:PE.HDEPE. LDPE black40% Dehumidifying dryer |
PE.HDEPE. LDPE black40% pellet dryer application
PE.HDEPE. LDPE black40% Dehumidifying dryer
PE.HDEPE. LDPE black40% pellet dryer This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
PE.HDEPE. LDPE black40% pellets dryer and other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.
|
PE.HDEPE. LDPE black40% pellet dryer Precautions
PE.HDEPE. LDPE black40% pellets dryer PE.HDEPE. LDPE black40% Dehumidifying dryerMaintenance of PE.HDEPE. LDPE black40% desiccant dryer:
1. Record the daily operation and maintenance of PE.HDEPE. LDPE black40% desiccant dryer and establish files;
2. Regularly train operators, especially new employees;
3. Regularly maintain and maintain the single machine in the system;
4. Regularly check for leaks in conveying pipelines, especially vacuum pipelines and compressed air lines;
5. Clean the dust on the electrical parts of the equipment regularly.
Maintenance of PE.HDEPE. LDPE black40% granules dryer:
1. During the drying process of the material, all parts of the equipment in contact with the material need to be cleaned and sterilized;
2. The best operating temperature range of PE.HDEPE. LDPE black40% desiccant dryer is 15℃～40℃ to avoid excessively low or high temperature, which will affect the dehumidification efficiency or damage the equipment;
3. Regularly clean the central filter in the desiccant dryer, and replace it if it is damaged;
4. Clean the air filter regularly (about once every two weeks) to maintain the dehumidification and dust removal efficiency and life of the machine;
5. After cleaning the suction hopper and drying barrel, install them in place;
6. In order to improve the solubility, instant solubility, and dry products, they should be continuously discharged from the drying chamber quickly and packaged after cooling.
Doing the above maintenance work on the PE.HDEPE. LDPE black40% dehumidification dryer can reduce the probability of equipment failure, reduce maintenance costs, and effectively extend the service life of the PE.HDEPE. LDPE black40% pellet dryer.
Product alias:PE.HDEPE. LDPE black40% dryer,PE.HDEPE. LDPE black40% material mixture dryer,PE.HDEPE. LDPE black40% polymer dryer |
|
|
+8613669807274
+8613669807274
wto-btb@wto-btb.com
Tel: +8613669807274
SMS: +8613669807274