Professional Plastic dryer, Plastic pellet dryer, plastic Dehumidifying dryer manufacturer

plastic resin dryers| RSS

Plastic dryer

Technology

principle

Video

Accessories

Industry Application

Cost budget

Equipment

maintenance

About us

Welcome to join the plastic resin dryers website (dehumidifying dryer, Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer)! This is a global manufacturer and supplier of dehumidifying dryers, providing more comprehensive plastic dehumidification dryers, plastic dehumidifiers, plastic dryers, r plastic resin dryers exchange platform website, including dehumidifying and drying from zero basis to plastic resin dryers Machine equipment, plastic resin dryers application, technology, assembly accessories, circuit design, plastic resin dryers principle, dehumidifying dryer installation and other information!

plastic resin dryers

plastic resin dryers Details description
product name:plastic resin dryers
release time:2020-09-05
Numbering:plastic resin dryers-001
Brand:wto-btb
Price:¥By function
weight :By function
unit weight:Kg/set
manufacturer:wto-btb
patent:wto-btb
Producing country:china
simple description:Mainly used for the dehumidification of plastics, resins, PET, PE, PC, PPO, TPU, PLA and other plastics, so that the materials can be dried to improve the quality of plastic products,
This is a device used to dehumidifying plastic resin to
achieve drying. For example,POM,ABS,TPE,PAL,ABS,CAB,
EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.
LDPE black40%,PEEK,PE(1),PEN,PES,PET,PETG,PI,
PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,
PIT,PUR,PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryer and other plastic resins must be
dehumidified and dried during the production process to
improve the quality of the finished product.
Product alias:Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer
plastic resin dryers Product introduction

plastic resin dryers parameter

Model

Capacity(kg)

Heater(kw)

Blower(w)

Overall Dimensions(cm)

Model suitable

Weight(kg)

MHD-12E

12

1.8

50

65X40X85

1oz

25

MHD-25E

25

3

90

75X50X105

3oz

35

MHD-50E

50

3.9

100

90X55X120

5-8oz

45

MHD-75E

75

3.9

100

95X60X130

8-10oz

50

MHD-100E

100

6

250

100X70X140

10-20oz

70

MHD-150E

150

6

350

110X75X160

15-20oz

80

MHD-200E

200

12

350

120X85X170

20-30oz

120

MHD-300E

3300

15

350

145X100X185

25-30oz

120

MHD-400E

400

18

550

150X105X200

30-40oz

230

MHD-500E

500

21

750

150X105X210

40-50oz

250

MHD-600E

600

21

750

150X105X220

40-50oz

250

MHD-800E

800

27

750

150X110X240

50-60oz

300

MHD-1000E

1000

30

1100

185X135X270

60oz以上

400

MHD-2000E

2000

60

5500

1480X1800X3600

60oz以上

780

MHD-3000E

3000

64

7500

1600X2010X4050

60oz以上

1150


Model Capacity (KG) HeatingPower
(KW)
Blower
(W)
Power
(V)
Dimensions
(HxWxD,MM)
Approx.Net Weight
(KG)
HGB-6 6 1.5 150 1φ 220V 490x490x785 25
HGB-12 12 2 160 1φ 220V 540x435x850 35
HGB-25 25 3 150 1φ 220V 605x560x1240 50
HGB-50 50 3.9 160 3φ 380V 706x594x1410 75
HGB-75 75 4.2 240 3φ 380V 751x649x1520 105
HGB-100 100 6.2 240 3φ 380V 817x581x1670 125
HGB-150 150 7 240 3φ 380V 868x710x1800 160
HGB-200 200 11 300 3φ 380V 995x830x1930 210
HGB-300 300 18 320 3φ 380V 1160x975x2280 330
HGB-400 400 20 360 3φ 380V 1220x990x2330 365
HGB-500 500 22 750 3φ 380V 1150x1045x2430 385
HGB-600 600 24 750 3φ 380V 1210x1070x2540 400
HGB-800 800 30 1500 3φ 380V 1390x1120x2730 600
HGB-1000 1000 36 1500 3φ 380V 1525x1425x3670 650
HGB-1200 1200 36 1500 3φ 380V 1600x1510x3722 835
HGB-1500 1500 40 2200 3φ 380V 1730x1680x3880 900
HGB-1800 1800 45 2200 3φ 380V 1835x1680x4060 1005
HGB-2000 2000 45 2200 3φ 380V 1870x1710x4415 1130
HGB-3000 3000 50 3700 3φ 380V 2080x1920x4520 1650
HGB-3500 3500 50 3700 3φ 380V 2141x1976x4863 2120
HGB-4000 4000 60 3700 3φ 380V 2192x2040x4936 2870
HGB-5000 5000 60 5500 3φ 380V 2355x2160x5120 3510

Plastic (resin) dehumidification dryer equipment

Energy saving Plastic desiccant dryer Plastic crystallization Dryer box type plastic resin dryer
Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer Plastic crystallization Dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer box type plastic resin dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer
Hopper desiccant dryer Honeycomb plastic dehumidifier dryer Standard plastic resin dryer
Hopper desiccant dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer Honeycomb dehumidifier dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer Standard plastic resin dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer
Standard plastic Dehumidifying Dryer 2 in 1 plastic desiccant dryer 3 in 1 plastic Dehumidifying Dryer
Standard Dehumidifying Dryer Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer 2 in 1 plastic desiccant dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer 3 in 1 Dehumidifying Dryer,Plastic dehumidifying dryer,plastic dehumidifier, plastic dryer, Resin dehumidifying dryer

Product alias:Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer,plastic resin dryers

plastic resin dryers Equipment principle

The dehumidification methods of dehumidification dryer are:
1. Dehumidification by adsorption wheel
The thin plate impregnated with hygroscopic agent is processed into a honeycomb wheel for ventilation to achieve the dehumidification effect.
2. Liquid absorption dehumidification

There are two types of liquid absorption dehumidification, one is to use the spray of lithium chloride aqueous solution to absorb water, the dew point can be reduced to about, but the equipment is larger, and the absorption liquid must be replaced; the other is to use capillary action to absorb water on the solid On the moisture absorbent, the dew point can be reduced, but the equipment will also become larger when the adsorption area is large.
3. Compression and dehumidification
Compress and cool the moist air to separate its moisture to achieve dehumidification effect. It should be noted that this dehumidification method is effective in small air volume occasions, but is not suitable for large air volume.
4. Cooling and dehumidification
The air is cooled to below the dew point, and then the condensed moisture is removed to achieve the dehumidification effect. This method is effective when the dew point is above.
The dehumidifier dryer system (compressor, evaporator, condenser) reduces the temperature of the surface cooler below the dew point temperature of the air, and a fan draws moist air into the machine for heat exchange with the surface cooler. The humid air When the water vapor is condensed and formed into water droplets, it is discharged out of the body or into the water tank in the body, and dry air is discharged into the room. This circulation reduces the indoor humidity, and the humid space achieves a dry effect.
Industrial dehumidification dryers can also choose temperature-regulating dryers, which can adjust the temperature by themselves according to the degree of dryness of the product. Heavy-duty industrial dehumidification dryers are general, but general air dehumidification and drying are also available for drying. plastic resin dryers It adopts double condenser structure to ensure lower return air temperature and dew point.
1. plastic resin dryers Adopt P.I.D temperature control system, which has regeneration temperature setting and actual temperature display screen.
2. Adjustable rotating speed control of honeycomb wheel.
plastic resin dryers
3. The honeycomb can reach a dew point of -40°C, and can reach a dew point of -50°C or even lower when the configuration is enhanced.
4. Optional PLC control with LCD touch man-machine interface.
5. Dew point meter that can monitor the dehumidification effect of the machine at any time is optional.
Plastic Dehumidifying Dryer,Plastic Dryer,Plastic dehumidification dryer, Plastic Dehumidifier,Resin Dryers, Resin dehumidifying, Resin Dehumidifier,Plastic drying equipment
6. The machine occupies a small area and is easy to move, and the machine can be replaced at will.

Product alias:Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer

plastic resin dryers application

The contact surface of the fuselage is made of all stainless materials.
Precision die-cast aluminum shell, smooth surface, good heat preservation performance.
Silent fan, optional air filter to ensure the cleanliness of raw materials.
The proportional deviation indicating temperature controller is used to accurately control the temperature.
Both the barrel body and the machine base are equipped with sight windows, which can directly observe the internal raw materials.
The curved design of the electric heating cylinder avoids burning caused by the accumulation of raw material powder at the bottom of the cylinder.
The cast aluminum mold is independently designed, and the barrel is turned back to fit any manipulator.
Another 50-800kg insulation type is available: double-layer material barrel, stainless steel electric heating tube, heat dissipation electric heating tube.
Mainly used for the dehumidification of plastics, resins, PET, PE, PC, PPO, TPU, PLA and other plastics, so that the materials can be dried to improve the quality of plastic products 1. Foundry industry:
In this process, the wax mold is repeatedly immersed in the clay. These outer layers form the mold. When the wax is melted, the molten metal can be poured into it. Dry air (very low vapor pressure) is better than others. The heating source is more commonly used to dry the clay layer, because the dry air will not deform the wax mold. The use of a hygroscopic dehumidifier can stabilize the operating cost of foundries in the foundry industry and increase the production volume without slowing down the production pace in the wet months, and the process drying time can be shortened by 50%.
2. Dehumidification and drying of plastic raw material resin:
All plastic raw material resins have a certain degree of hygroscopicity. When the plastic raw material particles are extruded, the moisture is heated and evaporated by the plastic raw material dehumidifier. These vapors will cause cracks in the structure and appearance of the plastic material. The desiccant dryer can reduce the humidity in the plastic raw materials and improve the quality of the finished product.
plastic resin dryers;This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.

Application of Dehumidifying dryer on PET materials Application of plastic dryer in bottle blowing Application of plastic dryer in resin industry
Dehumidifying dryer,plastic dryer Dehumidifying dryer,plastic dryer plastic dryer, plastic dehumidifying dryer
Application of plastic dryer in PE industry Application of plastic dryer in TPU industry Application of plastic dryer in PPO industry
Dehumidifying dryer,plastic dryer,dehumidifying dryer Dehumidifying dryer,plastic dryer, plastic dehumidifying dryer Dehumidifying dryer,plastic dryer, plastic dehumidifying dryer
Central feeding system Dehumidifying dryer Dehumidifying dryer for injection molding industry Dehumidifying dryer for blow molding industry
Dehumidifying dryer,plastic dryer, plastic dryer plastic resin dryers

Product alias:Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer,plastic resin dryers

plastic resin dryers Precautions

一. Precautions for operation of desiccant dryer:
1. Make sure that the dehumidification dryer has been installed and adjusted;
2. Turn on the power switch on the control box power supply and the dehumidifier panel;
3. Check the temperature indication of the material barrel frequently, and repair it in time if any malfunction is found;
4. When the temperature rises to the specified temperature, check whether it is consistent with the temperature of the lower part;
5. Keep the barrel full at any time during production;
6. The raw materials can be produced only after the specified drying time is fully reached;
7. When the drying is completed, when the machine is to be shut down, close the feeding plate first, and then close the feeding system after pumping the bottom raw materials.
 二. Maintenance of dehumidification dryer:
1. Please confirm to provide cooling circulating water before machine operation;
2. Regularly clean the dehumidification return air aluminum mesh and the recycled motor aluminum mesh;
3. Regularly check whether the pipeline is damaged, loose, or dew;
4. Regularly check whether the floating belt is worn.
plastic resin dryers Maintenance:
1. plastic resin dryersCheck the parts regularly, 1-2 times a month. The inspection items are whether the worm, bearing, shaft seal and other movable parts are flexible in rotation and wear. Any defects should be repaired in time for normal use.
2.plastic resin dryers Electrical control parts should be kept clean and sensitive, and faults should be repaired in time.
3.plastic resin dryers When one use is completed or work is stopped, the remaining materials should be taken out of the plastic drying and mixing machine, and the remaining powder in each part of the machine should be cleaned. If it is out of service for a long time, the machine must be wiped clean and covered with a tarp cloth.
4.plastic resin dryers When assembling and disassembling the mixing paddle of the plastic drying color mixing machine, it should be disassembled, steadily installed, and handled gently to avoid deformation and damage.
Correct operation for plastic resin dryers:

1. Before starting up, check the power distribution of all equipment and pipelines before work. If there are hidden dangers, remove them and deal with them in time.
2. Clean the air inlet filter of the heater.
3. When the temperature of the imported heat transfer oil of the main engine rises to 100-120℃, the induced air can be started.
4. The inlet temperature of the cloth bag can reach 70℃ or higher, which can be opened for stirring, stirring, and the number of rotations is appropriate.
5. Air pressure: main machine inlet 6-10Mpa, cloth bag inlet, main machine outlet 20-26Mpa, cloth bag outlet 36-40Mpa.
6. Unloading will start within 15 minutes when the machine is turned on and the unloading cannot be stopped for any reason, until the material in the bag box is unloaded after the machine stops.
7. Each shift must have a special person to watch the instrument on the panel, and if there is an abnormality, and find it out in time, the watcher can not leave without authorization until the machine stops.
8. The feeding personnel should carefully observe the material during feeding to avoid foreign matter in the material and cause accidents.
9. In normal work, the temperature of the heat transfer oil inlet cannot exceed 250°C, otherwise it will be opened and closed immediately to cool down.
10. When you hear noise in the host during work, stop it immediately, open the side door of the host, cool down and use a magnetic stick or touch it to clean out the foreign objects.
11. When the power is cut off during work, immediately close the thermal oil valve, open and close, and open the side door of the main engine to cool down.
12.plastic resin dryers When the power is cut, the cloth bag should be cleaned first. When the induced air is turned on, open the side door of the main unit to observe whether there is sparks. If necessary, spray with water (mist).
13. If there is a sudden change in the radiator oil bag pipeline (severe oil leakage, fire, etc.), the main oil guide valve should be closed immediately, and on-site fire fighting should be carried out immediately, and the boiler should be notified to cool down.
14. If sparks and explosions are found on the main engine and the bag box, immediately stop the induced air, open the closed valve, and close the valve of the main oil pipeline.
15. When you find sparks in the bag, take the time to unwind the material that is on fire, flush the bag with water, and control the amount of water to prevent the bag from being damaged even if the water level is too high.
16. plastic resin dryers Operators must keep a clear head when they are on the job, and keep patrolling and checking and not leaving the job without permission.

Product alias:Resin dehumidifier_Plastic dehumidifier_PET,PE,PC,PPO plastic dryer,Standard plastic dryer,resin dryer,Ordinary plastic dryer,Two-machine integrated dehumidification dryer,plastic resin dryers

Plastic dehumidifying dryer Common problems of dehumidifying dryer
Dehumidification dryer gravimetric blender granules mixing machine
plastic resin dryer, Plastic dehumidifying dryer,3 in 1 dehumidifying dryer gravimetric blender plastic granules mixing machine
This is the manufacturer of plastic resin dryers http://global.wto-btb.com Information provided
http://global.wto-btb.com It is a free service platform for global suppliers)
Links:  google plastic dryer Dehumidifying Dryer gravimetric blender beryllium copper Central feeding system
Ask for a quotation
WhatsApp

+8613669807274
Wechat

+8613669807274

wto-btb@wto-btb.com

Tel: +8613669807274

SMS: +8613669807274