PMMA Dehumidifying dryer parameter

Plastic (resin) dehumidification dryer equipment

Energy saving Plastic desiccant dryer	Plastic crystallization Dryer	box type plastic resin dryer
Hopper desiccant dryer	Honeycomb plastic dehumidifier dryer	Standard plastic resin dryer
Standard plastic Dehumidifying Dryer	2 in 1 plastic desiccant dryer	3 in 1 plastic Dehumidifying Dryer

Product alias:PMMA Dehumidifying dryer,PMMA Dehumidifying dryer

PMMA Dehumidifying dryer Equipment principle

PMMA Dehumidifying dryer PMMA Dehumidifying dryer It adopts double condenser structure to ensure lower return air temperature and dew point.
1. PMMA Dehumidifying dryer Adopt P.I.D temperature control system, which has regeneration temperature setting and actual temperature display screen.
2. Adjustable rotating speed control of honeycomb wheel.

3. The honeycomb can reach a dew point of -40°C, and can reach a dew point of -50°C or even lower when the configuration is enhanced.
4. Optional PLC control with LCD touch man-machine interface.
5. Dew point meter that can monitor the dehumidification effect of the machine at any time is optional.

6. The machine occupies a small area and is easy to move, and the machine can be replaced at will.

Product alias:PMMA Dehumidifying dryer

PMMA Dehumidifying dryer application

PMMA Dehumidifying dryer
1. Foundry industry:
In this process, the wax mold is repeatedly immersed in the clay. These outer layers form the mold. When the wax is melted, the molten metal can be poured into it. Dry air (very low vapor pressure) is better than others. The heating source is more commonly used to dry the clay layer, because the dry air will not deform the wax mold. The use of a hygroscopic dehumidifier can stabilize the operating cost of foundries in the foundry industry and increase the production volume without slowing down the production pace in the wet months, and the process drying time can be shortened by 50%.
2. Dehumidification and drying of plastic raw material resin:
All plastic raw material resins have a certain degree of hygroscopicity. When the plastic raw material particles are extruded, the moisture is heated and evaporated by the plastic raw material dehumidifier. These vapors will cause cracks in the structure and appearance of the plastic material. The desiccant dryer can reduce the humidity in the plastic raw materials and improve the quality of the finished product.
PMMA Dehumidifying dryer;This is a device used to dehumidifying plastic resin to achieve drying. For example,
POM,ABS,TPE,PAL,ABS,CAB,EVA(2),EVOH,LM(4),LCP,PA11,PA6.46.6,PAI,PAR,PBT,
PC,PC/ABS,PC/PBT,PE.HDEPE,LDPE black3%,PE.HDEPE.LDPE black40%,PEEK,PE(1),
PEN,PES,PET,PETG,PI,PMMA,POM,PP,PPO,PPS,PS,[GPPS.EPS.HIPS],PSU,PIT,PUR,
PVC,SAN,SB,TPE,TPE,TPO,TPU,
Dehumidifier dryerand other plastic resins must be dehumidified and dried during the production process to improve the quality of the finished product.

Application of Dehumidifying dryer on PET materials	Application of plastic dryer in bottle blowing	Application of plastic dryer in resin industry
Application of plastic dryer in PE industry	Application of plastic dryer in TPU industry	Application of plastic dryer in PPO industry
Central feeding system Dehumidifying dryer	Dehumidifying dryer for injection molding industry	Dehumidifying dryer for blow molding industry

Product alias:PMMA Dehumidifying dryer,PMMA Dehumidifying dryer

PMMA Dehumidifying dryer Precautions

PMMA Dehumidifying dryer
PMMA Dehumidifying dryer Maintenance：
1. PMMA Dehumidifying dryerCheck the parts regularly, 1-2 times a month. The inspection items are whether the worm, bearing, shaft seal and other movable parts are flexible in rotation and wear. Any defects should be repaired in time for normal use.
2.PMMA Dehumidifying dryer Electrical control parts should be kept clean and sensitive, and faults should be repaired in time.
3.PMMA Dehumidifying dryer When one use is completed or work is stopped, the remaining materials should be taken out of the plastic drying and mixing machine, and the remaining powder in each part of the machine should be cleaned. If it is out of service for a long time, the machine must be wiped clean and covered with a tarp cloth.
4.PMMA Dehumidifying dryer When assembling and disassembling the mixing paddle of the plastic drying color mixing machine, it should be disassembled, steadily installed, and handled gently to avoid deformation and damage.
Correct operation for PMMA Dehumidifying dryer:

1. Before starting up, check the power distribution of all equipment and pipelines before work. If there are hidden dangers, remove them and deal with them in time.
2. Clean the air inlet filter of the heater.
3. When the temperature of the imported heat transfer oil of the main engine rises to 100-120℃, the induced air can be started.
4. The inlet temperature of the cloth bag can reach 70℃ or higher, which can be opened for stirring, stirring, and the number of rotations is appropriate.
5. Air pressure: main machine inlet 6-10Mpa, cloth bag inlet, main machine outlet 20-26Mpa, cloth bag outlet 36-40Mpa.
6. Unloading will start within 15 minutes when the machine is turned on and the unloading cannot be stopped for any reason, until the material in the bag box is unloaded after the machine stops.
7. Each shift must have a special person to watch the instrument on the panel, and if there is an abnormality, and find it out in time, the watcher can not leave without authorization until the machine stops.
8. The feeding personnel should carefully observe the material during feeding to avoid foreign matter in the material and cause accidents.
9. In normal work, the temperature of the heat transfer oil inlet cannot exceed 250°C, otherwise it will be opened and closed immediately to cool down.
10. When you hear noise in the host during work, stop it immediately, open the side door of the host, cool down and use a magnetic stick or touch it to clean out the foreign objects.
11. When the power is cut off during work, immediately close the thermal oil valve, open and close, and open the side door of the main engine to cool down.
12.PMMA Dehumidifying dryer When the power is cut, the cloth bag should be cleaned first. When the induced air is turned on, open the side door of the main unit to observe whether there is sparks. If necessary, spray with water (mist).
13. If there is a sudden change in the radiator oil bag pipeline (severe oil leakage, fire, etc.), the main oil guide valve should be closed immediately, and on-site fire fighting should be carried out immediately, and the boiler should be notified to cool down.
14. If sparks and explosions are found on the main engine and the bag box, immediately stop the induced air, open the closed valve, and close the valve of the main oil pipeline.
15. When you find sparks in the bag, take the time to unwind the material that is on fire, flush the bag with water, and control the amount of water to prevent the bag from being damaged even if the water level is too high.
16. PMMA Dehumidifying dryer Operators must keep a clear head when they are on the job, and keep patrolling and checking and not leaving the job without permission.

Product alias:PMMA Dehumidifying dryer,PMMA Dehumidifying dryer